Description
 |
 |
Briggs & Stratton Horizontal 37 HP EFI Vanguard Engine 1-1/8" x 4" #61E377-0142
37hp Briggs Vanguard
New EFI: Enables up to 25% fuel savings
1-1/8" x 4" shaft, tapped 7/16" with 1/4" keyway.
1-1/8" x 4" shaft, tapped 7/16" with 1/4" keyway.
Cast iron sleeves, full pressure lube w/ oil filter,
electric start with 20amp alternator, advanced debris management system,
Less fuel tank. Includes muffler, keyswitch and throttle lever
Universal replacement engine for pressure washers, saws,
compressors, rollers, log splitters, etc.
Model 61E377-0142
160 lbs
Engine Specifications
| SKU | 61E377-0142-J1 |
| Model/Type/Trim | 61E377-0142-J1 |
| Air Cleaner | Low Prof Dual Elem Oval Inlet |
| Alternator | 20/50 amp |
| Casing Clamp | Without |
| Controls | Man Frict w/High Speed Detent |
| Crankshaft | Straight - 1 1/8" Dia - 4" PTO |
| Crankshaft Details | 1/4" Keyway, 7/16-20 UNF-2B |
| Emissions Certification | EPA Cert-Not For Sale In Calif |
| Engine Idle Speed | Governed Idle 1750 +/- 100 RPM |
| Engine Package | Electronic Fuel Injection |
| Engine Sold In | United States & Canada |
| Engine Speed | 4000 +/- 0100 RPM - No Load |
| Flywheel | Heavy - Cast Iron (Painted) |
| Fuel Line | 15" with 20 Micron Filter |
| Fuel Pump | Installed |
| Fuel Tank | Without |
| Label Power | Vanguard EFI 993cc 37GHP |
| Lubrication | Full Pressure Lube |
| Oil Cooler | Installed |
| Oil Dipstick | Extended Towards Starter Side |
| Oil Drain | Dual - M14 Threads Both Sides |
| Oil Filter | Installed |
| Oil Pressure Switch | Oil Pressure Switch 7-10 PSI |
| Purge Port | Low Vac Capped,Connector Loose |
| Regulator | Installed |
| Spark Plug Boot | Rubber |
| Wire Harness | 6 Pin - Weather Resistant |
You may also like
Recently viewed
ORDER ONLINE 24 HOURS A DAY
OR CALL 1-888-862-2386 MON-FRI 7:30 TO 5 CST
  
|
  
|